pure resistance मीनिंग इन हिंदी

उदाहरण वाक्य

1. The higher the voltage the higher the power consumption in the case of a pure resistance load.
2. Reflection will be nearly eliminated if the coaxial cable is terminated in a pure resistance equal to its impedance.
3. In some cases the physical length of the antenna can be " trimmed " to obtain a pure resistance.
4. A wave is partly reflected when a transmission line is terminated with other than a pure resistance equal to its characteristic impedance.
5. :This makes no difference because the relationship is linear at any instant, and for a pure resistance there is no phase difference between the voltage and current.
6. Note that for " pure resistances " ( imaginary devices that have no capacitance or inductance, just resistance ), their impedance at any frequency is the same as their dc resistance.
7. From the chart it can be seen that in the passband the closest impedance match to a constant pure resistance termination occurs at approximately " m " = 0.6.
8. In simple cases ( such as low-frequency or direct-current power transmission ) the reactance may be negligible or zero; the impedance can be considered a pure resistance, expressed as a real number.
9. In general, elements R _ 1, R _ 2, and R _ 3 need not be pure resistances ( i . e ., they may be capacitors, inductors, or impedance networks ).
10. The inductive reactance of the coil is equal and opposite to, and cancels, the capacitive reactance of the antenna, so the loaded antenna presents a pure resistance to the transmission line, preventing energy from being reflected.